3Ware 720-0192-00, Manual

Page: 30 / 150

Common Tasks Mapped to CLI Commands
www.3ware.com 22
Add a time slot to a verify
schedule /cx add verify 67
Add a time slot to a selftest
schedule /cx add selftest 68
Enable/disable the rebuild/migrate
schedule and set the task rate /cx set rebuild 70
Enable/disable the verify schedule
and set the task rate /cx set verify 72
Set the verify schedule to
advanced or basic /cx set
verify=advanced|basic|1..5 73
Set the rebuild/migrate task rate /cx set rebuildrate 72
Set the rebuild/migrate task mode /cx set rebuildmode 71
Set the verify task rate /cx set verifyrate 75
Set the verify task mode /cx set verifymode 74
Set the basic verify start time and
day /cx set verify=basic [pref=ddd:hh] 74
Enable/disable the selftest
schedule /cx set selftest 76
View controller alarms /cx show alarms
/cx show events
/cx show AENs
48
Unit Maintenance Tasks
Start a rebuild /cx/ux start rebuild 90
Start a verify /cx/ux start verify 90
Pause/resume rebuild /cx/ux pause rebuild and /cx/ux
resume rebuild 92
Stop verify /cx/ux stop verify 92
Enable/disable autoverify /cx/ux set autoverify 92
Identify all drives that make up a
unit by blinking associated LEDs /cx/ux set identify 64
Port Tasks
Locate drive by blinking an LED /cx/px set identify 115
Check if LED is set to on or off /cx/px show identify 108
View information for specific drive /cx/px show 106
Table 5: Common Tasks Mapped to CLI Commands
Task CLI Command Page