3Ware 720-0192-00 Manual Download Page 2

 

Proprietary Rights Notice

This document contains proprietary information of LSI Corporation. The information contained herein is not 
to be used by or disclosed to third parties without the express written permission of an officer of LSI 
Corporation.

Document Description

Document  720-0192-00, Rev. A. May 2009.
This document will remain the official reference source for all revisions and releases of this product until 
rescinded by an update.

Disclaimer

It is the policy of LSI Corporation to improve products as new technology, components, software, and 
firmware become available. LSI reserves the right to make changes to any products herein at any time 
without notice. All features, functions, and operations described herein may not be marketed by LSI in all 
parts of the world. In some instances, photographs and figures are of equipment prototypes. Therefore, 
before using this document, consult your LSI representative for information that is applicable and current. LSI 
DOES NOT ASSUME ANY RESPONSIBILITY OR LIABILITY FOR THE USE OF ANY PRODUCTS DESCRIBED HEREIN 
EXCEPT AS EXPRESSLY AGREED TO IN WRITING BY LSI.

LSI products are not intended for use in life-support appliances, devices, or systems. Use of any LSI product in 
such applications without written consent of the appropriate LSI officer is prohibited.

License Restriction

The purchase or use of an LSI Corporation product does not convey a license under any patent, copyright, 
trademark, or other intellectual property right of LSI or third parties.

Copyright Notice

© 2009 LSI Corporation. All rights reserved.

Trademark Acknowledgments

3ware®, Escalade®, 3DM®, and TwinStor® are all registered trademarks of LSI Corporation. The 3ware logo, 
3BM, Multi-Lane, StorSave, StorSwitch, StreamFusion, and R5 Fusion are all trademarks of LSI. . All other brand 
and product names may be trademarks of their respective companies.

Summary of Contents for 720-0192-00























































































































































Reviews: