Chapter 2. CLI Syntax Reference
33
3ware SAS/SATA RAID Controller CLI Guide, Version 9.5.2
Controller Object Commands
Controller object commands provide information and perform actions related
to a specific controller, such as
/c0
. For example, you use controller object
commands to see alarms specific to a controller, to create schedules for when
background tasks are run, and to set policies for the controller. You also use
the controller object command
/cx add type
to create RAID arrays.
Syntax
/c
x
show
/c
x
show
attribute
[
attribute
...] where attributes are:
achip|allunitstatus|
autocarve(9000 series SX/SE/SA only)|
autorebuild(9000 series SX/SE/SA only)|bios|
carvesize(9000 series SX/SE/SA only)|
ctlbus(9000 series SX/SE/SA only|
dpmstat[type=inst|ra|ext](9000 series SX/SE/SA only;
however type=ext is only for SE/SA)
driver|drivestatus[pause[lines=n]]|firmware|
memory|model|monitor|numdrives|numports|numunits|
ondegrade(9500S only)|pcb|pchip|serial|
spinup|stagger|unitstatus|
/c
x
show all (where all means attributes and configurations)
/c
x
show diag
/c
x
show alarms [reverse]
/c
x
show events [reverse]
/c
x
show AENS [reverse]
/c
x
show rebuild (9000 series)
/c
x
show rebuildmode (9000 series SE/SA only)
/c
x
show rebuildrate (9000 series SE/SA only)
/c
x
show verify (9000 series)
/c
x
show verifymode (9000 series SE/SA only)
/c
x
show verifyrate (9000 series SE/SA only)
/c
x
show selftest (9000 series)
/c
x
show phy (9690SA only)
/c
x
add type=<RaidType>
(RaidType={raid0,raid1,raid5,raid6(9650SE and higher
only),raid10,raid50,single,spare})
disk=<
p:-p..
>
[stripe=<
Stripe
>][noscan][nocache|nowrcache]
[nordcache|rdcachebasic]
[group=<3|4|5|6|7|8|9|10|11|12|13|14|15|16>]
[autoverify][noqpolicy][ignorECC]
[name=
string
](9000 series)
[v0=n|vol=a:b:c:d](n=size of first volume in GB)
[rapidrecovery=all|rebuild|disable](9000 series SE/SA)
[storsave=<protect|balance|perform>]
(9000 series SX/SE/SA only)
Summary of Contents for 720-0192-00
Page 3: ......
