![background image](http://html1.mh-extra.com/html/3com/vcx/vcx_manual_441788045.webp)
Activating Do Not Disturb
45
hands-free hears the hands-free tone. A user that receives a page hears
the page tone.
If the VCX system or the telephone reboots or is upgraded with new
software, the ringer resets to the default ringer enabled (feature disabled)
mode.
To mute the telephone ringer:
1
Press
Feature
+
489
. The LCD displays:
Ringer is now muted.
2
To clear the display, press the
Release
button. The next time you receive
an incoming call, the ringer is muted.
3
To turn this feature off, press
Feature
+
489
again. The LCD displays:
Ringer is now enabled.
4
To clear the display, press the
Release
button.
Activating Do Not
Disturb
When you enable Do Not Disturb, incoming calls immediately go to the
call coverage point set by you or your administrator. The default call
coverage point is your voice mailbox. The call coverage point is set
through the VCX User Interface (see
Chapter 7
).
When your telephone is in Do Not Disturb mode:
■
An incoming call does not cause your telephone to ring. If you are
logged in to multiple telephones using the same telephone number
and one of the telephones enables Do Not Disturb, the feature applies
to all telephones—an incoming call will not ring on any of the
telephones.
■
You can use the telephone to dial outgoing calls.
■
If you enable Do Not Disturb while one or more calls are ringing, the
pending calls are sent to your call coverage point and Do Not Disturb
is enabled for all subsequent calls.
■
If you are a Hunt Group member and you enable Do Not Disturb,
personal (non-Hunt Group) calls go to your call coverage point.
However, Hunt Group calls always ring on a member’s telephone,
regardless of the Do Not Disturb setting.
If your telephone is part of a bridged extension, see
Do Not Disturb and
Bridged Line Calls
for additional information.
Summary of Contents for VCX
