3Com VCX, Manual

Page: 78 / 118

78 C
HAPTER
6: S
TANDARD
F
EATURES
To block call monitoring on an agent extension to make a private call:
1 Pick up the handset.
2 Press Feature + 429 .
The Display Panel shows the following prompt:
Enter the phone number:
Press # to complete!
3 Enter the extension of the private call and press # .
Alternatively you can combine steps 2 and 3 by using the following single
command after picking up the handset:
*429*<extension>
For
<extension>
, you can either enter the private telephone extension or
press a speed dial button mapped to that extension.
Remote Call
Forward
The Remote Call Forward feature allows you to configure the forwarding
options of a telephone from another telephone in the network. This is
useful if, for example, person A is on vacation and all of person A’s calls
must be forwarded to person B. This feature enables person B to
configure Call Forward Universal on the source telephone (person A).
Note that person A can be at one site and person B can be at a different
site.
The VCX administrator must authorize use of the Remote Call Forward
feature. The administrator can authorize you to remotely change the call
forward options on one telephone or all the phones in the network. For
example, if the administrator authorizes you to change only person A’s
forwarding options, you can enter a feature code (468) and redirect
person A’s calls to any other extension, including your own.
When successfully configured, the remote (destination) phone’s LED (if
available) will flash for all forwarded calls, and the LCD will also display a
call forward message.
To remotely enable a telephone to forward calls to another extension:
1 Pick up the handset.
2 Press Feature + 468 .
The Display Panel prompts you to enter the remote telephone number.