3Com VCX V7122, User Manual

Page: 163 / 488

V7122 Gateway User Guide
163
ini File Field Name
Web Parameter Name
Valid Range and Description
EnableSilenceDisconnect
[Disconnect Call on Silence
Detection]
1 = The gateway disconnect calls in which silence occurs in both (call)
directions for more than 120 seconds.
0 = Call is not disconnected when silence is detected (default).
The silence duration can be set by the ‘FarEndDisconnectSilencePeriod’
parameter (default 120).
To activate this feature set: ‘EnableSilenceCompression’ to 1 and
‘FarEndDisconnectSilenceMethod’ to 1.
FarEndDisconnectSilence
Period
[Silence Detection Period]
Duration of silence period (in seconds) prior to call disconnection.
The range is 10 to 28800 (8 hours). The default is 120 seconds.
Applicable to gateways, that use DSP templates 2 or 3.
FarEndDisconnectSilence
Method
[Silence Detection Method]
Silence detection method.
0 (None)
= Silence detection option is disabled.
1 (Packets Count) = According to packet count.
2 (Voice/Energy Detectors) = N/A.
3 (All) = N/A.
FarEndDisconnectSilence
Threshold Threshold of the packet count (in percents), below which is considered
silence by the media gateway.
The valid range is 1 to 100. The default is 8%.
Applicable only if silence is detected according to packet count
(FarEndDisconnectSilenceMethod = 1).
Automatic Update Parameters
CmpFileURL
Specifies the name of the cmp file and the location of the server (IP address
or FQDN) from which the gateway loads a new cmp file and updates itself.
The cmp file can be loaded using: TFTP, HTTP, HTTPS, FTP, FTPS or NFS.
For example: http://192.168.0.1/filename
ƒ When this parameter is set in the ini file, the gateway always
loads the cmp file after it is reset.
ƒ The cmp file is validated before it is burned to flash. The
checksum of the cmp file is also compared to the previously-
burnt checksum to avoid unnecessary resets.
ƒ The maximum length of the URL address is 99 characters.