3Com VCX V7122 User Manual Download Page 309

Page: 309 / 488

V7122 Gateway User Guide

309

Table 62

Customizable Logo ini File Parameters

Parameter Description

BkgImageFileName

The name (and path) of the file containing the new background.
Use a gif, jpg or jpeg image file.
The default is 3Com background file.

The length of the name of the image file is limited to 47
characters.

Customizing the Product Name

The Product Name text string can be modified according to OEMs specific requirements.

To replace 3Com’ default product name with a text string

using the Web Interface

, modify

the two

ini

file parameters in

Table 63

according to the procedure described in

Modifying

ini File Parameters Using the Web AdminPage

To replace 3Com’ default product name with a text string

via the ini file

, add/modify the

two

ini

file parameters in

Table 63

according to the procedure described in

Modifying an

ini File

Table 63

Web Appearance Customizable

ini

File Parameters

Parameter Description

UseProductName

0 = Don’t change the product name (default).
1 = Enable product name change.

UserProductName

Text string that replaces the product name.
The default is ‘V7122’.
The string can be up to 29 characters.

Modifying ini File Parameters Using the Web AdminPage

To modify

ini

file parameters using the AdminPage:

Access the gateway’s

Embedded Web Server (see

Accessing the Embedded Web

Server

In the URL field, append the suffix ‘AdminPage’ (note that it’s case-sensitive) to the IP
address, for example,

http://10.1.229.17/AdminPage

Click the

INI Parameters

option, the INI Parameters screen is displayed.

Summary of Contents for VCX V7122









































































































































































































































































































































































































































































































Search results

Summary of Contents for VCX V7122

Reviews:

3Com VCX V7122, User Manual, Page: 309 / 488

Search results

Summary of Contents for VCX V7122

Reviews: