3Com VCX V7122, User Manual, Page: 391 / 488

V7122 Gateway User Guide
391
C
HAPTER
16: C
ONFIGURATION
F
ILES
This section describes the configuration ( dat ) files that are load (in addition to the ini file) to
the gateway. The configuration files are:
ƒ Call Progress Tones file (see Configuring the Call Progress Tones ).
ƒ Prerecorded Tones file (see Prerecorded Tones (PRT) File ).
ƒ Voice Prompts file (see Voice Prompts File ).
ƒ CAS protocol configuration files (see CAS Protocol Configuration Files ).
ƒ
User Information file (see User Information File ).
To load any of the configuration files to the gateway use the Embedded Web Server (see
Auxiliary Files ) or alternatively specify the name of the relevant configuration file in the
gateway’s ini file and load it (the ini file) to the gateway (see Loading the cmp File, Booting
the Device ).
Configuring the Call Progress Tones
The Call Progress Tones, configuration file used by the gateway is a binary file (with the
extension
dat ) which contains the definitions of the Call Progress Tones (levels and
frequencies) that are detected / generated by the gateway.
Users can either use, one of the supplied gateway configuration ( dat ) files, or construct their
own file. To construct their own configuration file, users are recommended, to modify the
supplied
usa_tone.ini file (in any standard text editor) to suit their specific requirements, and
to convert it (the modified ini file) into binary format using the TrunkPack Downloadable
Conversion Utility. For the description of the procedure on how to convert CPT ini file to a
binary dat file, see Converting a CPT ini File to a Binary dat File .
Only the dat file can be loaded to the gateway.
To load the Call Progress Tones (dat ) file to the gateway, use the Embedded Web Server
(see Auxiliary Files ) or the ini file (see Configuration Files Parameters ).