3Com VCX V7122 User Manual Download Page 108

Page: 108 / 488

108

V7122 GatewayUser Guide

Modify each bit field according to your requirements.

Click

the

Submit

button to save your changes.

After modifying the parameters:

To apply the changes to the selected trunk only, click the

Apply Trunk Settings

button.

To apply the changes to all the trunks, click the

Apply to all Trunks

button.

The screen is refreshed; parameters become read-only (indicated by being grayed). The

Stop Trunk

button appears at the bottom of the screen.

To save the changes so they are available after a power fail, see

Saving Configuration

Some parameter configuration options require a device reset; when this is the
case, the Web Interface prompts the user.

To reset the gateway, see

Saving Configuration

Configuring SS7 Tunneling

For a detailed description of the SS7 Tunneling parameters, see

SS7 Parameter Tables

From the SS7 Configuration menu you can:

Configure M2P2 Attributes (see

Configuring M2P2 Attributes

)

Configure Links (see

Configuring Links

Configure Sigtran Group IDs (see

Configuring Sigtran Group Ids

)

Configure Sigtran Interface IDs (see

Configuring Sigtran Interface Ids

)

Configuring M2P2 Attributes

For a detailed description of M2P2 attributes, see

SS7 Parameter Tables

To configure the M2P2 Attributes parameters:

Open the ‘M2P2 Attributes‘ screen (

Advanced Configuration

menu >

SS7

Configuration

M2P2 Attributes

option); the ‘M2P2 Attributes’ screen is displayed.

Summary of Contents for VCX V7122









































































































































































































































































































































































































































































































Search results

Summary of Contents for VCX V7122

Reviews:

3Com VCX V7122, User Manual, Page: 108 / 488

Search results

Summary of Contents for VCX V7122

Reviews: