![background image](http://html1.mh-extra.com/html/3com/vcx-v7122/vcx-v7122_user-manual_440856159.webp)
V7122 Gateway User Guide
159
ini
File Field Name
Web Parameter Name
Valid Range and Description
NFSServers_GID
[GID]
Group ID used in authentication if using AUTH_UNIX.
The valid range is 0 to 65537. The default is 1
NFSServers_VlanType
[VLAN Type]
The VLAN, OAM [0] or Media [1], to use when accessing the
remote file system. The default is to use the media VLAN.
This parameter applies only if VLANs are enabled or if
Multiple IPs is configured (see
VLANS and Multiple IPs
).
Internal Firewall
AccessList_Source_IP
[Source IP]
IP address (or DNS name) of source network, or a specific
host.
AccessList_Net_Mask
[Mask]
IP network mask. 255.255.255.255 for a single host or the
appropriate value for the source IP addresses.
The IP address of the sender of the incoming packet is
bitwise ANDed with this mask and then compared to the field
‘Source IP’.
AccessList_Start_Port
AccessList_End_Port
[Local Port Range]
The destination UDP/TCP ports (on this device) to which
packets are sent.
The valid range is 0 to 65535.
When the protocol type isn’t TCP or UDP, the entire
range must be provided.
AccessList_Protocol
[Protocol]
The protocol type (for example, UDP, TCP, ICMP, ESP or
‘Any’), or the IANA protocol number (in the range of 0 (Any)
to 255).
The protocol field also accepts the abbreviated
strings ‘SIP’, ‘MGCP’, ‘MEGACO’ and ‘HTTP’.
Specifying these strings implies selection of the TCP
or UDP protocols, and the appropriate port numbers
as defined on the device.
AccessList_Packet_Size
[Packet Size]
Maximum allowed packet size.
The valid range is 0 to 65535.
When filtering fragmented IP packets, the Packet
Size field relates to the overall (reassembled) packet
size, not to the size of each fragment.
AccessList_Byte_Rate
[Byte Rate]
Expected traffic rate (bytes per second).
AccessList_Byte_Burst
Burst Bytes
Tolerance of traffic rate limit (number of bytes)
AccessList_Allow_Type
[Action Upon Match]
Action upon match (allow or block)
AccessList_MatchCount
[Match Count]
A read-only field that provides the number of packets
accepted / rejected by a specific rule.
Summary of Contents for VCX V7122
