3Com VCX V7122, User Manual, Page: 173 / 488

V7122 Gateway User Guide
173
ini File Field Name
Web Parameter Name
Valid Range and Description
AlarmHistoryTableMaxSize Determines the maximum number of rows in the Alarm History table.
The parameter can be controlled by the Config Global Entry Limit MIB
(located in the Notification Log MIB).
The valid range is 50 to 1000. The default value is 500.
SNMP Trap Parameters
SNMPManagerTableIP_x
[SNMP Managers Table]
Up to five IP addresses of remote hosts that are used as SNMP
Managers. The device sends SNMP traps to these IP addresses.
Enter the IP address in dotted format notation, for example
108.10.1.255.
SNMPManagerTrapPort_x
[SNMP Managers Table]
Up to five parameters used to define the Port numbers of the remote
SNMP Managers. The device sends SNMP traps to these ports.
The first entry (out of the five) replaces the obsolete
parameter SNMPTrapPort.
The default SNMP trap port is 162
The valid SNMP trap port range is 100 to 4000.
SNMPManagerTrapUser_x This parameter can be set to the name of any configured SNMPV3 user
to associate with this trap destination. This determines the trap format,
authentication level, and encryption level. By default, the trap is
associated with the SNMP trap community string.
SNMPManagerIsUsed_x
[SNMP Managers Table]
Up to five parameters, each determines the validity of the parameters
(IP address and port number) of the corresponding SNMP Manager
used to receive SNMP traps.
0 = Disabled (default)
1 = Enabled
SNMPManagerTrapSendingEnabl
e_x
[SNMP Managers Table]
Up to five parameters, each determines the activation/deactivation of
sending traps to the corresponding SNMP Manager.
0 = Sending is disabled
1 = Sending is enabled (default)
SNMPTrapManagerHostName
[Trap Manager Host Name]
Defines a FQDN of a remote host that is used as an SNMP Manager.
The resolved IP address replaces the last entry in the trap manager
table (defined by the parameter ‘SNMPManagerTableIP_x’) and the last
trap manager entry of snmpTargetAddrTable in the snmpTargetMIB.
For example: 'mngr.corp.mycompany.com'.
The valid range is a 99-character string
SNMP Community String Parameters
SNMPReadOnlyCommunityString
_x
[SNMP Community Strings Table]
Up to five read-only community strings (up to 19 characters each).
The default string is ‘public’.
SNMPReadWriteCommunityStrin
g_x
[SNMP Community Strings Table]
Up to five read / write community strings (up to 19 characters each).
The default string is ‘private’.
SNMPTrapCommunityString
[SNMP Community Strings Table]
Community string used in traps (up to 19 characters).
The default string is ‘trapuser’.