3Com VCX V7122, User Manual

Page: 218 / 488

218
V7122 GatewayUser Guide
ini File Field Name
Web Parameter Name
Valid Range and Description
SwapRedirectNumber
[Swap Redirect and Called
Numbers]
0 = Don't change numbers (default)
1 = Incoming ISDN call that includes redirect number (sometimes referred
as ‘original called number’) uses this number instead of the called number.
Prefix2RedirectNumber
[Add Prefix to Redirect
Number]
Defines a string Prefix that is added to the Redirect number received from
the Tel side. This Prefix is added to the Redirect Number in the Diversion
header.
The valid range is an 8-character string. The default is an empty string.
AddTON2RPI
[Add Number Plan and Type
to Remote Party ID Header]
0 = TON/PLAN parameters aren’t included in the RPID header.
1 = TON/PLAN parameters are included in the RPID header (default).
If RPID header is enabled (EnableRPIHeader = 1) and ‘AddTON2RPI=1’, it
is possible to configure the calling and called number type and number plan
using the Number Manipulation tables for Tel
Æ IP calls.
NumberMapTel2IP
[Destination Phone Number
Manipulation Table for
Tel
Æ IP calls]
Manipulates the destination number for Tel to IP calls.
NumberMapTel2IP = a,b,c,d,e,f,g
a
= Destination number prefix
b = Number of stripped digits from the left, or (if brackets are used)
from the right. A combination of both options is allowed.
c
= String to add as prefix, or (if brackets are used) as suffix. A
combination of both options is allowed.
d
= Number of remaining digits from the right
e = Number Plan used in RPID header
f = Number Type used in RPID header
g = Source number prefix
The ‘b’ to ‘f’ manipulations rules are applied if the called and calling numbers
match the ‘a’ and ‘g’ conditions.
The manipulation rules are executed in the following order: ‘b’, ‘d’ and ‘c’.
Parameters can be skipped by using the sign ‘$$’, for example:
NumberMapTel2IP=01,2,972,$$,0,0,$$
NumberMapTel2IP=03,(2),667,$$,0,0,22