3Com VCX V7122, User Manual, Page: 448 / 488

448
V7122 GatewayUser Guide
3
Click the Select File… button under the ‘Encode ini File(s)’ section.
4
Navigate to the folder that contains the ini file you want to encode.
5
Click the ini file, and then click the Open button; the name and path of both the ini file
and the output encoded file appear in the fields under the Select File button. Note that
the name and extension of the output file can be modified.
6
Click the Encode File(s) button; an encoded ini file with the name and extension you
specified is created.
To decode an encoded ini file follow the next 4 steps:
1
Click the Select File… button under the ‘Decode ini File(s)’ section.
2
Navigate to the folder that contains the file you want to decode.
3
Click the file and click the Open button. the name and path of both the encode ini file and
the output decoded file appear in the fields under the Select File button. Note that the
name of the output file can be modified.
4
Click the Decode File(s) button; a decoded ini file with the name you specified is
created.
The decoding process verifies the input file for validity. Any change made to the
encoded file causes an error and the decoding process is aborted.
Creating a Loadable Prerecorded Tones File
For detailed information on the PRT file, see PRT File Format .
To create a loadable PRT dat file from your raw data files follow the next 7 steps:
1
Prepare the prerecorded tones (raw data PCM or L8) files you want to combine into a
single
dat file using standard recording utilities.
2
Execute the TrunkPack Downloadable Conversion utility, DConvert.exe (supplied with
the software package); the utility’s main screen opens (shown in
Figure 128 ).
3
Click the Process Prerecorded Tones File(s) button; the Prerecorded Tones File(s)
screen opens.