3Com OfficeConnect WX1200, Command Reference Manual

Page: 52 / 646

52 C
HAPTER
3: S
YSTEM
S
ERVICE
C
OMMANDS
Examples — To create a banner that says Update meeting at 3 p.m.,
type the following command:
WX4400# set banner motd ^Update meeting at 3 p.m.^
success: change accepted.
See Also
„
clear banner motd on page 38
„
display banner motd on page 41
set confirm
Enables or disables the display of confirmation messages for commands
that might have a large impact on the network.
Syntax —
set confirm { on | off }
„
on — Enables confirmation messages.
„
off — Disables confirmation messages.
Defaults — Configuration messages are enabled.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — This command remains in effect for the duration of the session,
until you enter a quit command, or until you enter another set confirm
command.
MSS displays a message requiring confirmation when you enter certain
commands that can have a potentially large impact on the network. For
example:
WX4400# clear vlan red
This may disrupt user connectivity.
Do you wish to continue? (y/n) [n]
Examples — To turn off these confirmation messages, type the
following command:
WX4400# set confirm off
success: Confirm state is off