3Com OfficeConnect WX1200, Command Reference Manual

Page: 183 / 646

set snmp notify target 183
SNMPv3 with Traps To configure a notification target for traps from SNMPv3, use the
following command:
Syntax —
set snmp notify target target-num ip-addr [ :udp-port-number ]
usm trap user username
[profile profile-name ]
[security {unsecured | authenticated | encrypted}]
„
target-num
— ID for the target. This ID is local to the WX switch and
does not need to correspond to a value on the target itself. You can
specify a number from 1 to 10.
„
ip-addr
[
:udp-port-number
] — IP address of the server. You also can
specify the UDP port number to send notifications to.
„
username
— USM username. This option is applicable only when the
SNMP version is usm .
„
profile profile-name
— Notification profile this SNMP user will use
to specify the notification types to send or drop.
„
security
— Specifies the security level, and is applicable only
{unsecured |
when the SNMP version is usm :
authenticated |
-
unsecured
— Message exchanges are not
encrypted} authenticated, nor are they encrypted. This is
the default.
-
authenticated
— Message exchanges are
authenticated, but are not encrypted.
-
encrypted
— Message exchanges are
authenticated and encrypted.
SNMPv2c with
Informs
To configure a notification target for informs from SNMPv2c, use the
following command:
Syntax —
set snmp notify target target-num ip-addr [ :udp-port-number ]
v2c community-string inform
[profile profile-name ]
[retries num ]
[timeout num ]
„
target-num
— ID for the target. This ID is local to the WX switch and
does not need to correspond to a value on the target itself. You can
specify a number from 1 to 10.