3Com OfficeConnect WX1200, Command Reference Manual

Page: 175 / 646

set ntp update-interval 175
set ntp
update-interval
Changes how often MSS sends queries to the NTP servers for updates.
Syntax —
set ntp update-interval seconds
„
seconds — Number of seconds between queries. You can specify
from 16 through 1,024 seconds.
Defaults — The default NTP update interval is 64 seconds.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following command changes the NTP update interval
to 128 seconds:
WX4400# set ntp update-interval 128
success: change accepted.
See Also
„
clear ntp server on page 131
„
clear ntp update-interval on page 132
„
display ntp on page 149
„
set ntp on page 173
„
set ntp server on page 174
set snmp
community
Configures a community string for SNMPv1 or SNMPv2c.
For SNMPv3, use the set snmp usm command to configure an SNMPv3
user. SNMPv3 does not use community strings.
Syntax —
set snmp community comm-string
access { read-only | read-notify | notify-only | read-write |
notify-read-write }
„
comm-string
— Name of the SNMP community. Specify between 1
and 32 alphanumeric characters, with no spaces.
„
read-only
— Allows an SNMP management application using the
string to get (read) object values on the switch but not to set (write)
them.