3Com OfficeConnect WX1200, Command Reference Manual

Page: 257 / 646

set mobility-profile mode 257
The following command adds port 3 to the magnolia Mobility Profile
(which is already assigned to port 2):
WX1200# set mobility-profile name magnolia port 3
success: change accepted.
See Also
„
clear mobility-profile on page 215
„
display mobility-profile on page 224
„
set mac-user attr on page 249
„
set mac-usergroup attr on page 254
„
set mobility-profile mode on page 257
„
set user attr on page 259
„
set usergroup on page 261
set mobility-profile
mode
Enables or disables the Mobility Profile feature on the WX switch.
CAUTION: When the Mobility Profile feature is enabled, a user is denied
access if assigned a Mobility-Profile attribute in the local WX switch
database or RADIUS server when no Mobility Profile of that name exists
on the WX switch.
Syntax — set mobility-profile mode { enable | disable }
„
enable
— Enables the use of the Mobility Profile feature on the WX
switch.
„
disable
— Specifies that all Mobility Profile attributes are ignored by
the WX switch.
Defaults — The Mobility Profile feature is disabled by default.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — To enable the use of the Mobility Profile feature, type the
following command:
WX1200# set mobility-profile mode enable
success: change accepted.