3Com OfficeConnect WX1200, Command Reference Manual

Page: 286 / 646

286 C
HAPTER
11: M
ANAGED
A
CCESS
P
OINT
C
OMMANDS
clear {ap | dap}
radio
Disables a MAP radio and resets it to its factory default settings.
Syntax —
clear { ap port-list | dap dap-num } radio { 1 | 2 | all }
„
ap port-list — List of ports connected to the MAP access point(s) on
which to reset a radio.
„
dap dap-num — Number of a Distributed MAP on which to reset a radio.
„
radio 1
— Radio 1 of the MAP.
„
radio 2
— Radio 2 of the MAP. (This option does not apply to
single-radio models.)
„
radio all — All radios on the MAP.
MAP-WX Security set dap fingerprint on page 331
set dap security on page 345
Radio State set {ap | dap} radio mode on page 341
Dual Homing set {ap | dap} bias on page 328
Load Balancing set {ap | dap} group on page 332
display {ap | dap} group on page 303
MAP
Administration and
Maintenance set {ap | dap} name on page 333
set {ap | dap} blink on page 330
set {ap | dap} upgrade-firmware on page 346
reset {ap | dap} on page 324
set {ap | dap} radio channel on page 339
set {ap | dap} radio tx-power on page 344
clear {ap | dap} radio on page 286
display {ap | dap} group on page 303
display {ap | dap} status on page 304
display {ap | dap} counters on page 294
display dap global on page 314
display dap connection on page 313
display dap unconfigured on page 316
display {ap | dap} qos-stats on page 300
display {ap | dap} etherstats on page 301
Table 49 Map Access Point Commands by Usage (continued)
Type Command