3Com OfficeConnect WX1200, Command Reference Manual

Page: 334 / 646

334 C
HAPTER
11: M
ANAGED
A
CCESS
P
OINT
C
OMMANDS
Examples — The following command changes the name of the MAP
access point on port 1 to techpubs :
WX1200# set ap 1 name techpubs
success: change accepted.
See Also
„
display {ap | dap} config on page 290
set {ap | dap} radio
antennatype
Sets the model number for an external antenna.
Syntax —
set { ap port-list | dap dap-num } radio { 1|2} antennatype
{ANT1060 | ANT1120 | ANT1180 |
ANT5060 | ANT5120 | ANT5180 |
ANT-1360-OUT | ANT-5360-OUT |ANT-5120-OUT | internal }
„
ap port-list — List of ports connected to the MAP access points on
which to set the channel.
„
dap dap-num
— Number of a Distributed MAP on which to set the
channel.
„
radio 1
— Radio 1 of the MAP.
„
radio 2
— Radio 2 of the MAP. (This option does not apply to
single-radio models.)
„
antennatype { ANT1060 | ANT1120 | ANT1180 | internal } —
802.11b/g external antenna models:
„
ANT1060 — 60° 802.11b/g antenna
„
ANT1120
— 120° 802.11b/g antenna
„
ANT1180
— 180° 802.11b/g antenna
„
internal — uses the internal antenna instead
„
antennatype { ANT5060 | ANT5120 | ANT5180 | internal }
—
802.11a external antenna models:
„
ANT5060
— 60° 802.11a antenna
„
ANT5120
— 120° 802.11a antenna
„
ANT5180
— 180° 802.11a antenna
„
internal
— uses the internal antenna instead