3Com OfficeConnect WX1200, Command Reference Manual

Page: 189 / 646

set snmp usm 189
„
access {read-only | read-notify | notify-only | read-write
| notify-read-write}
— Specifies the access level of the user:
„
read-only
—An SNMP management application using the string
can get (read) object values on the switch but cannot set (write)
them.
„
read-notify
—An SNMP management application using the string
can get object values on the switch but cannot set them. The
switch can use the string to send notifications.
„
notify-only
—The switch can use the string to send notifications.
„
read-write —An SNMP management application using the string
can get and set object values on the switch.
„
notify-read-write
— An SNMP management application using
the string can get and set object values on the switch. The switch
can use the string to send notifications.
„
auth-type {none | md5 | sha} {auth-pass-phrase string |
auth-key hex-string } — Specifies the authentication type used to
authenticate communications with the remote SNMP engine. You can
specify one of the following:
„
none —No authentication is used.
„
md5
—Message-digest algorithm 5 is used.
„
sha
—Secure Hashing Algorithm (SHA) is used.
If the authentication type is md5 or sha , you can specify a passphrase
or a hexadecimal key.
„
To specify a passphrase, use the auth-pass-phrase string option.
The string can be from 8 to 32 alphanumeric characters long, with
no spaces.
„
To specify a key, use the auth-key hex-string option.
„
encrypt-type {none | des | 3des | aes}
{encrypt-pass-phrase
string | encrypt-key hex-string }
—
Specifies the encryption type used for SNMP traffic. You can specify
one of the following:
„
none
—No encryption is used. This is the default.
„
des
—Data Encryption Standard (DES) encryption is used.
„
3des —Triple DES encryption is used.
„
aes
—Advanced Encryption Standard (AES) encryption is used.