3Com OfficeConnect WX1200, Command Reference Manual

Page: 415 / 646

set spantree portfast 415
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — This command applies only to the default VLAN (VLAN 1). To
change the cost of a port in another VLAN, use the set spantree
portvlancost command.
Examples — The following command changes the cost on ports 3 and 4
to 20:
WX1200# set spantree portcost 3,4 cost 20
success: change accepted.
See Also
„
clear spantree portcost on page 394
„
clear spantree portvlancost on page 395
„
display spantree on page 398
„
display spantree portvlancost on page 403
„
set spantree portvlancost on page 417
set spantree
portfast
Enables or disables STP port fast convergence on one or more ports on a
wireless LAN switch.
Syntax —
set spantree portfast port port-list { enable | disable }
„
port port-list — List of ports. MSS enables the feature on the
specified ports.
„
enable — Enables port fast convergence.
„
disable
— Disables port fast convergence.
Defaults — STP port fast convergence is disabled by default.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — Use port fast convergence on ports that are directly connected
to servers, hosts, or other MAC stations.