3Com 8R-002700-00, Getting Started Manual

Page: 26 / 66

3-12 C
HAPTER
3: C
ABLE
M
ODEM
S
OFTWARE
I
NSTALLATION
16 Close all open windows. You will be asked if you wish to restart your
computer. Click
Yes .
17 When your desktop reappears, click Windows Start and the click Run .
18 Type D:\setup.exe , where "D" is the letter of your CD-ROM drive (i.e. if
your CD-ROM drive's letter is a letter other than "D", type that letter in
the place of "D").
Installing the Cable
Modem Connection
Center (CMCC)
Software
1 When the CMCC software installer starts, you will see this screen. Click
OK .
NOTE: You will only see this screen if you are using Windows 95 or
Windows 98. Windows NT 4.0 users should move on to step 2.
2 Follow the on-screen instructions to install CMCC. At one point during
the installation, you will be asked whether you want the CMCC installer
to automatically install TCP/IP, Dial-Up Networking, and other
components. We recommend that you allow the installer to install these
components. However, if you choose to install these components
yourself, refer to "Appendix A: Installing Networking Components".
If you do not have SNMP Agent installed, you will see the following
screen.