3Com Switch 7750 Series
Command Reference Guide – DHCP
Chapter 1 DHCP Server Configuration Commands
1-17
IP Range from 4.0.0.0 to 4.255.255.255
IP Range from 5.5.5.0 to 5.5.5.0
IP Range from 5.5.5.2 to 5.5.5.255
1.1.18 display dhcp server ip-in-use
Syntax
display dhcp server ip-in-use
{
ip
ip-address
|
pool
[
pool-name
] |
interface
[
interface-type interface-number
] |
all
}
View
Any view
Parameter
ip
ip-address
: Specifies an IP address.
pool
[
pool-name
]: Specifies a global address pool. The
pool-name
argument, a string
of 1 to 35 characters, is the name of an address pool. If you do not provide this
argument, this command applies to all global address pools.
interface
[
interface-type interface-number
]: Specifies a VLAN interface. If you do not
specify a VLAN interface, this command applies to all VLAN interfaces.
all
: Specifies all address pools.
Description
Use the
display dhcp server ip-in-use
command to display the address binding
information of one IP address, the specified DHCP address pool(s) or all DHCP
address pools.
Related command:
reset dhcp server ip-in-use
.
Example
# Display the address binding information of all DHCP address pools.
<3Com> display dhcp server ip-in-use all
Global pool:
IP address Hardware address Lease expiration Type
2.2.2.2 44444-4444-4444 NOT Used Manual
Interface pool:
IP address Hardware address Lease expiration Type
5.5.5.1 0050-ba28-930a Jun 5 2003 10:56: 7 AM Auto:COMMITED
--- total 2 entry ---
