3Com Switch 7750 Series
Command Reference Guide – Routing Protocol
Chapter 7 Route Capacity Configuration Commands
7-5
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] memory auto-establish enable
7.1.5 memory
{
safety
|
limit
}*
Syntax
memory
{
safety
safety-value |
limit
limit-value
}*
undo memory
[
safety
|
limit
]
View
System view
Parameter
safety-value
: Safety free memory of the switch , in Mbytes. Its value range depends
on the free memory of the current switch.
limit-value
: Lower limit of the switch free memory, in Mbytes. Its value range depends
on the free memory of the current switch.
Description
Use the
memory limit
limit-value
command to configure the lower limit of the switch
free memory.
When the free memory of the switch is less than this limit, all the routing protocol
connections will be disconnected forcibly. The
limit-value
argument in the command
must be less than the current free memory safety value; otherwise, the configuration
will fail.
Use the
memory safety
safety-value
command to configure the safety value of the
switch free memory.
If you use the
memory auto-establish enable
command (the default configuration),
the routing protocol connection that is forcibly disconnected automatically recovers
when the free memory of the switch reaches this value. The
safety-value
argument in
the command must be greater than the current free memory lower limit; otherwise, the
configuration will fail.
Use the
memory safety
safety-value
limit
limit-value
command to change both the
safety value and lower limit of the switch free memory. The value of
safety-value
must
be greater than that of
limit-value
; otherwise, the configuration will fail.
Use the
undo memory
command to restore the default safety value and lower limit of
the switch free memory.
Related command:
memory auto-establish disable
,
memory auto-establish
enable
, and
display memory limit
.
