3Com Switch 7750 Series
Command Reference Guide – Routing Protocol
Chapter 6 IP Routing Policy Configuration Commands
6-14
Use the
undo if-match interface
command to cancel the setting of matching
condition.
By default, no if-match statement is defined.
As an if-match statement of route-policy, it matches the corresponding interface of
route next hop when filtering route.
Related command:
if-match acl
,
if-match ip-prefix
,
if-match ip next-hop
,
if-match
cost
,
if-match tag
,
route-policy
,
apply ip next-hop
,
apply cost
,
apply
local-preference
,
apply origin
, and
apply tag.
Example
# Define an if-match statement to match the route whose next hop interface is
Vlan-interface 1
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] route-policy policy permit node 1
%New sequence of this list
[3Com-route-policy] if-match interface Vlan-interface 1
6.1.17 if-match ip next-hop
Syntax
if-match ip next-hop
{
acl
acl-number
|
ip-prefix
ip-prefix-name
}
undo if-match ip next-hop
[
ip-prefix
]
View
Route policy view
Parameter
acl-number
: Number of the ACL used for filter. It ranges from 2,000 to 2,999.
ip-prefix-name
: Name of the prefix address list used for filter.
Description
Use the
if-match ip next-hop
command to configure one of the match rules of
route-policy on the next hop address of the routing information.
Use the
undo if-match ip next-hop
command to cancel the setting of ACL matching
condition.
Use the
undo if-match ip next-hop
ip-prefix
command to cancel the setting of
address prefix list matching condition.
By default, no if-match statement is defined.
