3Com Switch 7750 Series
Command Reference Guide – Password Control
Chapter 1 Password Control Configuration Commands
8
Display the password control information of the specified user. [3Com]display
local-user user-name test
The contents of local user test:
State: Active ServiceType Mask: T
Idle-cut: Disabled
Access-limit: Disabled Current AccessNum: 0
Bind location: Disabled
Vlan ID: Disabled
IP address: Disabled
MAC address: Disabled
User Privilege: 3
Password-Aging: Enabled (90 days)
Password-Length: Enabled (10 characters)
Password History was last reset 2 days ago.
1.1.7 password-control super
Syntax
password-control super
{
aging
aging-time
|
length
min-length
}
undo password-control super
{
aging
|
length
}
View
System view
Parameter
aging-time
: Aging time for super passwords. It ranges from 1 day to 365 days and
defaults to 90 days.
min-length
: Minimum length for super passwords. It ranges from 4 to 16 characters and
defaults to 10 characters.
Description
Use the
password-control super
command to configure the parameters related with
the supper passwords, including the password aging time and the minimum password
length.
Use the
undo password-control super
command to restore the default settings
for
the super passwords.
The super passwords are used for the user who has logged into the device and wants
to change from a lower privilege level to a higher privilege level.
Example
# Configure the aging time of the super passwords to 10 days.
