3Com Switch 7750 Series
Command Reference Guide – AAA, RADIUS, HWTACACS, EAD
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-44
Use the
undo retry stop-accounting
command to restore the default maximum
number of transmission attempts of the buffered stop-accounting requests.
Stop-accounting requests are critical to billing and will eventually affect the charges of
the users; they are important for both the users and the ISP. Therefore, the NAS should
do its best to transmit them to the RADIUS accounting server. If the RADIUS server
does not respond to such a request, the switch should first buffer the request on itself,
and then retransmit the request to the RADIUS accounting server until it gets a
response, or the maximum number of transmission attempts is reached (in this case, it
discards the request).
Related command:
reset stop-accounting-buffer
,
radius scheme
and
display
stop-accounting-buffer
.
Example
# In RADIUS scheme radius1, specify that the switch can transmit a buffered
stop-accounting request at most 1,000 times
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] radius scheme radius1
[3Com-radius-radius1] retry stop-accounting 1000
1.2.20 secondary accounting
Syntax
secondary accounting
ip-address
[
port-number
]
undo secondary accounting
View
RADIUS scheme view
Parameter
ip-address
: IP address, in dotted decimal notation. By default, the IP address of the
secondary accounting server is 0.0.0.0.
port-number
: UDP port number, ranging from 1 to 65535. By default, the UDP port
number of the secondary accounting service is 1813.
Description
Use the
secondary accounting
command to set the IP address and port number of
the secondary RADIUS accounting server.
Use the
undo secondary accounting
command to restore the default IP address and
port number of the secondary RADIUS accounting server.
See the description on the
primary accounting
command for details.
