5-3
Advanced Setup
SNMP
Configures SNMP settings
5-21
Rogue AP
Performs a scan on each VAP to determine any unauthorized APs
using, or attempting to use the network
5-30
AP Management
Enables Telnet, Web and SNMP on the device
5-31
Administration
Configures user name and password for management access;
upgrades software from local file, FTP or TFTP server; resets
configuration settings to factory defaults; and resets the access
point
5-34
WDS/STP Settings
Configures WDS bridging and Spanning Tree Protocol features
5-41
Logging and Time
Controls logging of Syslog error messages; sets the system clock
via SNTP server or manual configuration
5-49
RSSI
Configures RSSI value display, bridge link distance, and LED display
mode
5-52
Status
Displays information about the access point and wireless clients
5-78
AP Status
Displays configuration settings for the basic system and the
wireless interface
5-78
Station Status
Shows the wireless clients currently associated with the access
point
5-79
Rogue AP Status
Displays the Rouge AP scan results
5-81
RSSI Monitor
Displays RSSI signal strength results
5-82
Event Logs
Shows log messages stored in memory
5-83
802.11a Interface
Configures the IEEE 802.11a interface
5-53
Radio Settings
Configures common radio signal parameters and other settings
for each VAP interface
5-55
Security
Enables each virtual access point (VAP) interface, sets the Service
Set Identifier (SSID), and configures wireless security
5-68
802.11b/g Interface
Configures the IEEE 802.11g interface
5-53
Radio Settings
Configures common radio signal parameters and other settings
for each VAP interface
5-60
Security
Enables each VAP interface, sets the SSID, and configures wireless
security
5-68
Menu
Description
Page
Summary of Contents for 3CRWEASYA73 / WL-575
