3Com 3CRWEASYA73 / WL-575, User Manual, Page: 269 / 335

6-137
Using the Command Line Interface
Wireless Interface Commands
The commands described in this section configure connection parameters for the
wireless interfaces.
Table 26 Wireless Interface Commands
Command Function Mode Page
interface wireless Enters wireless interface configuration mode GC 6-138
vap Provides access to the VAP interface configuration
mode IC-W 6-139
speed Configures the maximum data rate at which the
access point transmits unicast packets IC-W 6-139
turbo Configures turbo mode to use a faster data rate IC-W (a) 6-140
multicast-data-rate Configures the maximum rate for transmitting
multicast packets on the wireless interface IC-W 6-141
channel Configures the radio channel IC-W 6-141
transmit-power Adjusts the power of the radio signals transmitted
from the access point IC-W 6-142
radio-mode Forces the operating mode of the 802.11g radio IC-W (b/g) 6-143
preamble Sets the length of the 802.11g signal preamble IC-W (b/g) 6-144
antenna control Selects the antenna control method to use for the
radio IC-W 6-144
antenna id Selects the antenna ID to use for the radio IC-W 6-145
antenna location Selects the location of the antenna IC-W 6-146
beacon-interval Configures the rate at which beacon signals are
transmitted from the access point IC-W 6-147
dtim-period Configures the rate at which stations in sleep mode
must wake up to receive broadcast/multicast
transmissions IC-W 6-147
fragmentation- length Configures the minimum packet size that can be
fragmented IC-W 6-148
rts-threshold Sets the packet size threshold at which an RTS must
be sent to the receiving station prior to the sending
station starting communications IC-W 6-149
super-a Enables Atheros proprietary Super A performance
enhancements IC-W (a) 6-150
super-g Enables Atheros proprietary Super G performance
enhancements IC-W (b/g) 6-150
description Adds a description to the wireless interface IC-W-VAP 6-151