3Com 3CRWEASYA73 / WL-575, User Manual, Page: 122 / 335

5-74
C
HAPTER
5: S
YSTEM
C
ONFIGURATION
„
Key – Selects the key number to use for encryption for each VAP interface. If
the clients have all four keys configured to the same values, you can change the
encryption key to any of the four settings without having to update the client
keys. (Default: Key 1)
Figure 52 WEP Keys
Client Types – Specifies the type of client to encrypt:
„
WEP and WPA clients – Both WEP and TKIP encryption are supported.
„
WPA clients only – All clients must support TKIP.
„
WEP clients only – All clients must support WEP.
WEP Configuration – Under open authentication it is still possible to configure
WEP keys.
„
Key Size – 64 Bit, 128 Bit, or 152 Bit key length. Note that the same size of
encryption key must be supported on all wireless clients. (Default: None)
„
Key Type – Select the preferred method of entering WEP encryption keys on the
access point and enter up to four keys:
• Hexadecimal: Enter keys as 10 hexadecimal digits (0-9 and A-F) for 64 bit
keys, 26 hexadecimal digits for 128 bit keys, or 32 hexadecimal digits for 152
bit keys (802.11a radio only). This is the default setting.