3Com 3CRWEASYA73 / WL-575, User Manual, Page: 150 / 335

6-18
C
HAPTER
6: C
OMMAND
L
INE
I
NTERFACE
Command Usage
• The access point supports Secure Shell version 2.0 only.
• After boot up, the SSH server needs about two minutes to generate host
encryption keys. The SSH server is disabled while the keys are being
generated. The
show system command displays the status of the SSH
server.
Example
ip ssh-server port
This command sets the Secure Shell server port. Use the no form to disable the
server.
Syntax
ip ssh-server port < port-number >
• port-number - The UDP port used by the SSH server. (Range: 1-65535)
Default Setting
22
Command Mode
Interface Configuration (Ethernet)
Example
ip telnet-server enable
This command enables the Telnet server. Use the no form to disable the server.
Syntax
ip telnet-server enable
no ip telnet-server
Default Setting
Interface enabled
AP(if-ethernet)#ip ssh-server enable
AP(if-ethernet)#
AP(if-ethernet)#ip ssh-server port 1124
AP(if-ethernet)#