3Com 3CRWEASYA73 / WL-575, User Manual, Page: 157 / 335

6-25
Using the Command Line Interface
autoconfig client-status
This command enables the unit to operate as a client that sends requests to a
specified server for configuration file updates, and schedules the times at which
the requests are sent.
Syntax
autoconfig client-status < disable | imediately | startup |
periodic
>
• disable - Disables the feature.
• immediately - Schedules an instantaineous search for new configuration
files.
• startup - Schedules a search for new configuration files when the unit
boots up.
• periodic - Schedules a search each time the unit boots up and
periodically. The periodic parameter may be configured using the
‘autoconfig interval’ command.
Default Setting
Disabled
Command Mode
Global Configuration
Example
This example schedules a search for configuration file updates at each boot up
and periodically, as well as specifying the interval time of 72 hours.
autoconfig interval
This command specifies the frequency with which the unit will search for
configuration file updates when the command “autoconfig client-status
periodic” is used.
Syntax
autoconfig interval < hours
>
hours - The period of time after which the unit will search for
configuration file updates. (Default: 24 hours; Length: 1-8760 hours)
AP (config)#autoconfig client-status periodic
AP (config)#autoconfig interval 72
AP (config)#