3Com 3CRWEASYA73 / WL-575, User Manual, Page: 152 / 335

6-20
C
HAPTER
6: C
OMMAND
L
INE
I
NTERFACE
Command Mode
Global Configuration
Example
Related Commands
ip http port (6-19)
ip https port
Use this command to specify the UDP port number used for HTTPS/SSL
connection to the access point’s Web interface. Use the
no form to restore the
default port.
Syntax
ip https port < port_number>
no ip https port
port_number – The UDP port used for HTTPS/SSL.
(Range: 80, 1024-65535)
Default Setting
443
Command Mode
Global Configuration
Command Usage
• You cannot configure the HTTP and HTTPS servers to use the same port.
• To avoid using common reserved TCP port numbers below 1024, the
configurable range is restricted to 443 and between 1024 and 65535.
• If you change the HTTPS port number, clients attempting to connect to the
HTTPS server must specify the port number in the URL, in this format:
https:// device : port_number
Example
AP (config)#ip http server
AP (config)#
AP (config)#ip https port 1234
AP (config)#