3Com 3CRWEASYA73 / WL-575, User Manual, Page: 296 / 335

6-164
C
HAPTER
6: C
OMMAND
L
INE
I
NTERFACE
auth
This command configures authentication for the VAP interface.
Syntax
auth < open-system | shared-key | wpa | wpa-psk | wpa2 | wpa2-psk |
wpa-wpa2-mixed | wpa-wpa2-psk-mixed | > <required | supported>
• open-system - Accepts the client without verifying its identity using a
shared key. “Open” authentication means either there is no encryption (if
encryption is disabled) or WEP-only encryption is used (if encryption is
enabled).
• shared-key - Authentication is based on a shared key that has been
distributed to all stations.
• wpa - Clients using WPA are accepted for authentication.
• wpa-psk - Clients using WPA with a Pre-shared Key are accepted for
authentication.
• wpa2 - Clients using WPA2 are accepted for authentication.
• wpa2-psk - Clients using WPA2 with a Pre-shared Key are accepted for
authentication.
• wpa-wpa2-mixed - Clients using WPA or WPA2 are accepted for
authentication.
• wpa-wpa2-psk-mixed - Clients using WPA or WPA2 with a Pre-shared
Key are accepted for authentication
• required - Clients are required to use WPA or WPA2.
• supported - Clients may use WPA or WPA2, if supported.
Default Setting
open-system
Command Mode
Interface Configuration (Wireless-VAP)
cipher-suite Selects an encryption method for the global key used
for multicast and broadcast traffic IC-W-VAP 6-169
mic_mode Specifies how to calculate the Message Integrity
Check (MIC) IC-W 6-170
wpa-pre-shared- key Defines a WPA preshared-key value IC-W-VAP 6-171
pmksa-lifetime Sets the lifetime PMK security associations IC-W-VAP 6-172
pre-authentication Enables WPA2 pre-authentication for fast roaming IC-W-VAP 6-173
Command Function Mode Page