3Com 3100, User Manual

Page: 30 / 114

30 C
HAPTER
3: NBX M
ESSAGING
Press * to cancel your message.
5 When you are ready to forward the message, press 1 .
6 Dial one of these destination numbers plus # :
■
The internal extension or mailbox number of the recipient
■
A speed dial number. See “Speed Dials” in Chapter 5 .
■
A voice mail group list number. (See “Using Voice Mail Group Lists”
later in this chapter.)
■
A site code plus extension (to send to a user on another NBX system in
your organization).
Example: neee or neeee (where n = one or more
site code digits and e = the extension digits on the other system).
For valid site codes in your organization, see your administrator.
7 To forward the message to several recipients, dial each destination
number followed by
# .
8 After the last destination number and its # , press # again to send your
message.
9 Follow the prompts to delete or save the message you just forwarded.
Creating and
Sending a Message
To create and send a message directly without actually making a call,
follow these steps:
1 Log in to your mailbox at your telephone or remotely.
2 Dial 2 to select Create and Send a Message .
3 At the tone, record a message that is at least 2 seconds long, and press #
to end the recording.
4 Optionally, press one of these buttons, OR proceed to step 5 .
Press 2 to re-record the message.
Press 3 to review the message.
Press 9 to mark the message Private or Urgent . See “Marking a
Message as Private or Urgent” later in this chapter.
Press * to cancel your message.
5 When you are ready to send the message, press 1 .
6 Dial one of these destination numbers plus # :
■
The internal extension or mailbox number of the recipient