P-793H v 2 Support Notes
Product FAQ
1. What is SHDSL, SHDSL.bis?
SHDSL stands for Symmetric High-data-rate Digital Subscriber Line. SHDSL
bases on TC-PAM (Trellis Coded Pulse Amplitude Modulation) which offers
symmetrical transmission speed up to 2.30 Mbps (2-wire mode).
SHDSL.bis boots SHDSL performance to approximately 5.70 Mbps (2-wire
mode) or 11.4 Mbps (4-wire mode).
2. How can I manage P-793H v2?
Multilingual Embedded Web GUI for Local and Remote management
SMT via console.
Telnet support (Administrator Password Protected ) for remote
configuration change and status monitoring
FTP/ TFTP sever, firmware upgrade and configuration backup and
restore are supported (Administrator Password Protected)
3. What is the default password for Web Configurator
?
There are two different accounts for P-793H v2 Web Configurator:
Common
User Account
and
Administrator Account.
By factory default the password for the two accounts are:
Common User Account:
user
Administrator Account:
1234
.
You can change the password after you logging in the Web Configurator.
Note:
By default, the password is “user”.
4.
What‟s the difference between „Common User Account‟ and
„Administrator Account‟?
For Common User Account, it can only access the status monitor of P-793H v2
and check the current system status.
For Administrator Account, besides accessing the status monitor of P-793H v2,
it can also access Wizard setup / Advanced setup of P-793H v2.
Moreover, only with Administrator Password, you could manage the P-793H v2
via FTP/TFTP or Telnet.
5. How do I know the P-793H v2's WAN IP address assigned by the ISP?
You can view
"IP Address: x.x.x.x"
shown in Web Configurator
„
Status-
>Device Information ->WAN Information
‟
.
11
All contents copy right © 2010 Zy XEL Communications Corporation.
