P-793H v 2 Support Notes
Using TFTP client software
Upload/download ZyNOS via LAN
Upload/download P-793H v2 configurations via LAN
(1) Using TFTP to upload/download ZyNOS via LAN
Step 1: TELNET to your P-793H v2 first before running the TFTP software
Step 2: Type the CI command
'sys stdio 0'
to disable console idle timeout
in
Command Line Interface (CLI)
Step 3: Run the TFTP client software
Step 4: Enter the IP address of the P-793H v2
Step 5:To upload the firmware, please save the remote file as
'ras'
to
P-793H v2. After the transfer is complete, the P-793H v2 will program the
upgraded firmware into FLASH ROM and reboot itself.
An example:
The 192.168.1.1 is the IP address of the P-793H v2. The local file is the source
file of the ZyNOS firmware that is available in your hard disk. The remote file is
the file name that will be saved in P-793H v2. Check the port number 69 and
512-Octet blocks for TFTP. Check
'Binary'
mode for file transferring.
(2) Using TFTP to upload/download SMT configurations via LAN
Step 1: TELNET to your P-793H v2 first before running the TFTP software
Step 2: Type the command
'sys stdio 0'
to disable console idle timeout in
Command Line Interface (CLI).
Step 3: Run the TFTP client software
Step 4: To download the P-793H v2 configuration, please get the remote file
'rom-0'
from the P-793H v2.
All contents copy right © 2010 Zy XEL Communications Corporation.
104