P-793H v 2 Support Notes
Key Settings:
RuleName
Give this rule a name, for example,
'WWW'
BW Budget
Configure the bandw idth you w ould like to allocate to this rule
Priority
Enter a number betw een 0 and 7 to set the priority of this class. The
higher the number, the higher the priority. The default setting is 3.
Use All
Managed
Bandwidth
Check this box if you w ould like to let this class to borrow bandw idth from
it's parents w hen the required bandw idth is higher than the configured
amount. Do not check this if you w ant to limit the bandw idth of this class
at the configured value.(Please note that you should also disable
Maxim ize Bandw idth Usage
on the interface to meet the condition.)
Service
Select
User-defined, SIP, FTP, or H.323
to specify the traffic types
Destination
IP Address
Enter the IP address of destination that meets this class.
Destination
Subnet
Mask
Enter the destination subnet mask.
Destination
Port
Enter the destination port number of the traffic.
Source IP
Address
Enter the IP address of source that meats this class. Note that for traffic
from
'LAN to WAN'
, since BWM is before NAT, you should use the IP
address before NAT processing.
Source
Subnet
Mask
Enter the destination subnet mask.
78
All contents copy right © 2010 Zy XEL Communications Corporation.
