Service
Port Number
FTP
21
Telnet
23
SMTP
25
DNS (Domain Name Server)
53
www-http (Web)
80
PPTP (Point-to-Point Tunneling
Protocol)
1723
P-793H v 2 Support Notes
Please note that a server can support more than one service, e.g., a server can
provide both FTP and Mail service, while another provides only Web service.
The following procedures show how to configure a server behind NAT.
Step 1: Login Web Configurator, Advanced Setup,
Network -> NAT -> Port
Forwarding.
Step 2: Select the service name from the pull-down menu, and fill in the server
Address on
„
Server IP Address
‟, then click button „
Add
‟ to save it.
Step 3: You could click the button
„Edit‟ on the rule to modify the Service name,
Server IP Address, Start/End Port.
The most often used port numbers are shown in the following table. Please
refer RFC 1700 for further information about port numbers.
Examples
Internet Access Only
Internet Access with an Internal Server
Using Multiple Global IP addresses for clients and servers
Support Non NAT Friendly Applications
(1) Internet Access Only
In our Internet Access example, we only need one rule where all our ILAs map
to one IGA assigned by the ISP. You can just use the default
SUA NAT
, or you
could select
Full Feature NAT
and select an Address Mapping Set with a
Many-to-One
Rule. See the following figure.
58
All contents copy right © 2010 Zy XEL Communications Corporation.
