P-793H v 2 Support Notes
None
NAT is disabled w hen you select this option.
SUA Only
When you select this option, this remote node
w ill use default SUA Address Mapping Set.
You can see it in CLI by command
„
ip nat
lookup 255
‟. It‟s a read-only sets w ith tw o
rules:
Many-to-One
and
server
mapping.
Select
Full Feature
w hen you require other
mapping types.
Configuring NAT
The P-793H v2 has 8 remote nodes and so allows you to configure 8 NAT
Address Mapping Sets, You must specify which NAT Address Mapping Set
(1~8) to use in the remote node when you select
Full Feature NAT.
You can edit 10 rules for each Address Mapping Set. You can edit the rules for
Address Mapping Sets #1 in Web Configurator. The other Address Mapping
Sets #2~8 can only be configured in CLI (Command Line Interface).
The NAT Server Set is a list of LAN side servers mapped to external ports. We
can configure it in Web Configurator, Advanced Setup,
Network -> NAT ->
Port
Forwarding.
To use the NAT server sets you‟ve configured, a
Server
rule must
be set up inside the NAT Address Mapping set. Please see NAT Server Sets for
further information on how to apply it.
When you select
SUA Only,
the P-793H v2 will use a default SUA Address
Mapping set for it. It has two rules:
Many-to-One
and
Server
. You can see it in
SMT menu 15.
Please note that the fields in this menu are read-only. However, the settings of
the rule set 2 can be modified in Web Configurator, Advanced Setup,
Network
56
All contents copy right © 2010 Zy XEL Communications Corporation.
