ZyXEL Communications NetAtlas, Руководство пользователя

Страница: 222 / 340

Chapter 16 IP Configuration
NetAtlas EPON Manager User’s Guide
222
The following table describes the related labels in this screen.
Table 108 IP Configuration > IP Address Setup
LABEL DESCRIPTION
Domain
Name
Server Enter the IP address of the domain name server in dotted decimal notation,
for example 192.168.1.20.
Default
Managemen
t Select which traffic flow (in_band or out_of_band) the OLT is to use to
send packets with an unknown source or that originated from the switch
itself (such as SNMP traps).
Select out_of_band to have the OLT send the packets to the out-of-band
management port. This means that device(s) connected to the other
port(s) do not receive these packets.
Select in_band to have the OLT send the packets to all ports except the
out-of-band management port. This means that device(s) connected to
out-of-band management port do not receive these packets.
In-band Management IP Address
In-band IP
Type
Select dhcp_client if you have a DHCP server that can assign the OLT an
IP address and subnet mask, a default gateway IP address and a domain
name server IP address.
Select static_ip if you don't have a DHCP server or if you wish to assign
static IP address information to the OLT. You need to fill in the following
fields when you select this option.
IP Address Enter the IP address of your OLT in dotted decimal notation for example
192.168.1.1.
IP Subnet
Mask Enter the IP subnet mask of your OLT in dotted decimal notation for
example 255.255.255.0.
Default
Gateway Enter the IP address of the default outgoing gateway in dotted decimal
notation, for example 192.168.1.254
VID Enter the VLAN identification number associated with the OLT IP address.
This is the VLAN ID of the CPU and is used for management only. The
default is "1". All ports, by default, are fixed members of this "management
VLAN" in order to manage the device from any port. If a port is not a
member of this VLAN, then users on that port cannot access the device. To
access the OLT make sure the port that you are connected to is a member
of Management VLAN.
Out-of-band Management IP Address
IP Address
Enter the IP address of your OLT in dotted decimal notation for example
192.168.0.1.
IP Subnet
Mask Enter the IP subnet mask of your OLT in dotted decimal notation for
example 255.255.255.0.
Default
Gateway Enter the IP address of the default outgoing gateway in dotted decimal
notation, for example 192.168.1.254
Apply Click Apply to save the changes.
In-band IP
Addresses You can create up to 64 IP addresses, which are used to access and
manage the OLT from the ports belonging to the pre-defined VLAN(s). You
must configure a VLAN first.
Index This field displays the index number of the rule.