ZyXEL Communications NetAtlas, Руководство пользователя

Страница: 209 / 340

Chapter 15 Multicast Configuration
NetAtlas EPON Manager User’s Guide
209
9
In the None list box, select the port(s) not to participate in MVR. No MVR
multicast traffic is sent or received on the port(s).
10
In the Tagging list box, select the port(s) to add the VLAN ID tag to all outgoing
frames.
11
Click OK to save the settings and close this screen. Otherwise, click Cancel to
discard the settings and close this screen.
12
A screen displays showing the configuration result. Click Close to exit the screen.
Figure 134 Multicast Configuration > Multicast VLAN: New MVLAN: Result
15.4.5 Creating a New Multicast Group
Follow the steps below to create a new MVR group.
1
In the Multicast VLAN screen, select one entry in the Multicast VLAN list table.
2
Click New... under Multicast Group.
3
A screen displays as shown. The Multicast VLAN ID field displays the VLAN ID to
which this MVR group setting applies. In the Name field, enter a descriptive name
for identification purposes.
Figure 135 Multicast Configuration > Multicast VLAN: New Group
4
In the Start Address field, enter the starting IP multicast address of the multicast
group in dotted decimal notation.