Zypcom Z34-PL, Руководство пользователя

Страница: 70 / 114

3-32
3
Ring Count
(S1)*
Register S1 counts the number of rings the modem
receives during an incoming call. When S1 matches the
value set for S0, the modem answers the call. S1 resets
to 0 if no ring occurs for 8 seconds.
Default = 0.
CAUTION: An asterisk (*) next to the S-registers
in this section indicates that it is read only.
Escape Character
(S2=0-128)
Register S2 defines an ASCII character as the escape
character.
Default = 43 (ASCII +) .
Return Character
(S3=0-127)
Register S3 defines the end-of-line character. Upon
receiving this character, the modem executes a
command line. The end-of-line character is also
appended to response messages.
Default = 13 (ASCII CR
or <ENTER> on a keyboard) .
Line Feed Character
(S4=0-127)
Register S4 defines the ASCII character that follows the
carriage return when the modem is set to give verbose
(word) responses (V1).
Default = 10 (ASCII LF) .