background image

This manual covers installation and operating instructions for the following 3Com modems:

U.S. Robotics 56 Kbps

 Voice internal and external modems

3Com, the 3Com logo, and U.S. Robotics are registered trademarks and 

Connections

, RapidComm, and

x2 are trademarks of 3Com Corporation or its subsidiaries. Windows is a registered trademark of
Microsoft Corp. CompuServe is a registered trademark of CompuServe Inc. America Online is a
registered trademark of America Online Inc. Any other trademarks, trade names, or service marks used
in this manual are the property of their respective owners.

© 1998 3Com Corporation
7770 North Frontage Road
Skokie, IL 60077-2690
All Rights Reserved

∗∗

 

IMPORTANT!

 In accordance with the ITU-T standard for 56K transmissions, this modem is capable of

56 Kbps downloads. However, due to FCC rules which restrict power output of the service providers’
modems, current download speeds are limited to 53 Kbps. Actual speeds may vary depending on line
conditions and other factors. Uploads from users to server equipment travel at speeds up to 31.2 Kbps.
An analog phone line compatible with the ITU-T 56K standard or x2

 technology, and an Internet

provider or corporate host site compatible with the ITU-T 56K standard or x2 technology are necessary
for these high-speed downloads.

Содержание 005605-00




















































































































Отзывы: