E
XTERNAL
M
ODEM
I
NSTALLATION WITH
W
INDOWS
95
45
5.
In the “Modems Properties” screen, you
should see your modem listed.
This means the installation was a success.
NOTE:
If you do not see your
modem listed in the preceding
screen, the Plug and Play installation
was unsuccessful. Please refer to the
“If Plug and Play Does Not Detect
Your Modem” section on
page 83
.
6.
Next, click the
Diagnostics
tab at the top
of the “Modems Properties” screen. Write
down the COM setting for your modem
below. (Your screen may show a different
setting than that shown in the following
screen.) You will need to know this setting
when you install your communications
software. Click
OK
.
COM Port _______