Zypcom Z34-PL, Руководство пользователя

Страница: 29 / 114

2-7
2
chipset-based modem before on your PC, you will need
to remove it first before installing the new driver files.
Please refer to the section entitled "Removing Old
Modem Drivers," which appears later in this chapter.
Z34-PL Installation
for Windows 95
When Windows 95 loads, it checks whether or not new
plug-and-play devices have been installed. If Windows
95 detects your new Zypcom Z34-PL board, it displays
the following message: “Windows 95 recognized new
hardware and was incorporating”. If it does not detect
your modem, it displays a different message: "Select
which drive you want to install for your new hardware."
From a bulleted list, select "Driver from disk provided by
hardware manufacturer." Click OK. Insert the CD
labeled "Windows 95 CD-ROM". Click OK.
Windows 95 then asks whether or not to use the
information already included in the system. If the
ISAPNP Unimodem ID is not already supported,
Windows 95 requests a disk which we have included
and is labeled Windows Drivers.
Click on OK and continue. You may need your
Windows 95 installation CD to copy needed files to your
Windows 95 system. Once all files are copied to your
Windows 95 directory, you may install the SuperVoice
communication software included with the modem. You
may also use the HyperTerminal program, which comes
with Windows 95, to test your modem. Please refer to
the section below entitled "Using HyperTerminal to Test
Your Modem".