Zypcom Z34-PL, Руководство пользователя

Страница: 43 / 114

3-5
3
AT Command Buffer
When you send the AT<ENTER> command to the
modem, it determines the DTE’s serial port speed and
bits per character. The modem supports these 10-bit
character formats:
q
8,N,1
q
7,E,1
q
7,O,1
q
7,N,2
q
7,MARK,1
q
7,SPACE,1
To clear each command parameter from the command
buffer, do one of the following:
1. Type AT<ENTER> or lower DTR to reset the
command buffer.
2. Use the <BACKSPACE> key to move backward or the
<DELETE> key to erase the last character.
Multiple commands can be entered into the command
buffer. You can control EIA signals, set answer mode,
change speaker volume, select response messages, and
turn off echo all in one command string. If your
command string is longer than 40 characters, an error
message will result.