Zypcom Z34-PL, Руководство пользователя

Страница: 38 / 114

2-16
2
Using Other Communication Software With Your Modem
Communication software allows you to change settings
and issue commands to your modem.
Once the modem hardware is installed and configured
properly, you may use the modem with any PC
communication software. The bundled software
package is pre-configured for optimal performance with
your modem. Please refer to the Software User’s guide
for additional information.
If you are using other communication software, please
follow these suggestions:
1. You must indicate to your communication software
which COM port and IRQ have been assigned to
your modem.
2. Set the Data Rate to 115.2 or 57.6 Kbps. Do not
select 33,600, 28,800 or 14,400 bps as serial port
rates.
3. Set the Flow Control to Hardware (or RTS/CTS).
4. Turn Auto Baud off (or Lock Baud Rate on).
5. Set Terminal Emulator to ANSI.
For Fax Setup:
1. Set the Flow Control to Hardware (or RTS/CTS).
2. Set Class 1 fax class.