ZOTYE JNJ7155 Скачать руководство пользователя страница 33

Страница: 33 / 290

Seat belt

031

Safety

Handling

Driving Guide

Operating Guide

DIY

Technical Data

Index

Correct wearing of safety belt

Caution !

● When pull out the belt and insert into the buckle, check if the

belt is twisted. Twisted belt may cause injury during collision.

● Hold the upper end of the belt and pull it out quickly to check

if the retractor works well. Normally, it shall lock quickly.

● Do not pull the belt to cross your body too fast, otherwise the

belt may be locked. If it is locked, retract it a little to unlock
and then pull out the belt evenly and slowly.

Warning!

● The lock pin of the belt shall be inserted to correspondent

buckle.

Unfasten the belt

To unfasten the belt, press red “PRESS” button on the buckle to
unlock and hold the belt to retract it slowly.

If the belt fails to retract smoothly, pull out the belt and check if it is
twisted. Ensure the belt retracts smoothly.

Содержание JNJ7155



































































































































































































































































































Результаты поиска

Содержание JNJ7155

Отзывы:

Похожие инструкции для JNJ7155

Бренды по названию

Популярные бренды

ZOTYE JNJ7155, Быстрый старт

Результаты поиска

Содержание JNJ7155

Отзывы:

Похожие инструкции для JNJ7155

Бренды по названию

Популярные бренды