2B Installing the ZoomAir PC Card under Windows NT 4.0
23
most of the way and then offer slight resistance as the pins are
engaged.
Do not force the card.
Installing the Drivers
Note:
NT Service Pack 4 or later is recommended for the
ZoomAir PC Card.
You are now ready to have Windows NT install the drivers for
your ZoomAir PC Card. Follow these steps:
1
1
Turn on the computer. Log in as a user with Administrative
Privileges, such as Administrator. When Windows NT has
finished starting up, click on Start | Settings | Control
Panel.
2
2
Double-click on the Network icon.
If networking is not already installed, you will see the follow-
ing dialog box:
Click on Yes. Go to
Installing with No Existing Network
below.
If a network has been previously installed on this computer,
you will see a Network dialog box with tabs. Click on the
Adapters tab and then on the Add button. Go to
Installing
on an Existing Network
on page 27.
Installing with No Existing Network
1
1
The Network Setup Wizard will start. The first dialog box
simply reports that Windows NT is preparing Network Setup.
The next dialog box will ask you how the computer will par-
ticipate on the network.
